We carry a wide range of products to suit a variety of budgets and tastes. Our most popular products are shown below. Please call or stop by for more information on products, current promotions and custom options.
1stage: 5 micron sediment filter, removes sediment, rust, dirt. (replace every 6-12 month)
2nd & 3rd stage: premium grade coconut shell carbon block filter, removes chlorine, chloramines, bad taste and odor (replace every 6-12 month)Overall rejection/removal rate:
99 to 100%
1st stage high rejection TFC/TFM-100GPD membrane, removes 95% to 97% of chemical, minerals, dissolved solids, like arsenic, lead, silica, nitrate, copper, ammonia, sodium, fluoride, etc. (replace every 12-24 month)
5th & 6th stage: de-ionized filter, further removes the mineral and chemical contents of water and achieving 99% to 100% removal rate (replace as needed, or after 600 to 1000 gallons). It comes with refillable clear casing. The DI resin inside changes color from green to dark brown when the resin is exhausted.
*Feed water pressure: 40-80 psi, (for pressure below 40 psi, use booster pump or permeate pump)
*Feed water temperature: 40-100 F
*pH range: 3-10 *Hardness: lower than 500ppm (hard water will shorten the life of filters, but system will still perform) Using a water softening system prior to RO+DI filter will prolong the life of filters.
*Dissolved iron: less than 1 ppm
*Total Dissolved Solids (TDS): less than 1000 ppm, higher TDS will shorten the life of filters.
15in width x 16in height x 5.5in depth
The system come with under-the-sink adapter, drain clamp, tubing, shut off valve. Optional easy-connect adapters are available for counter top installation or garden hose/ laundry room installation.
Overall rejection/removal rate:98% to 99% for the Ultra-pure, 95% for the drinking water 1st stage: 5 micron sediment filter, removes sediment, rust, dirt. (replace every 6-12 month)2nd & 3rd stage: premium grade coconut shell carbon block filter, removes chlorine, chloramines, bad taste and odor (replace every 6-12 month)4th stage high rejection TFC/TFM-100GPD membrane, removes 95% to 97% of chemical, minerals, dissolved solids, like arsenic, lead, silica, nitrate, copper, ammonia, sodium, fluoride, etc. (replace every 12-24 month)5th & 6th stage: de-ionized filter, further removes the mineral and chemical contents of water and achieving 99% to 100% removal rate (replace as needed, or after 600 to 1000 gallons). It comes with refillable clear casing. The DI resin inside changes color from green to dark brown when the resin is exhausted.
Operating parameter:*Feed water pressure: 40-80 psi, (for pressure below 40 psi, use booster pump or permeate pump)*Feed water temperature: 40-100 F*pH range: 3-10 *Hardness: lower than 500ppm (hard water will shorten the life of filters, but system will still perform) Using a water softening system prior to RO+DI filter will prolong the life of filters.*Dissolved iron: less than 1 ppm*Total Dissolved Solids (TDS): less than 1000 ppm, higher TDS will shorten the life of filters.
Dimension:15in width x 16in height x 5.5in depthThe system come with 4 gallon pressure tank, long reach dispensing faucet, under-the-sink adapter, drain clamp, tubing, shut off valve. Optional easy-connect adapters are available for counter top installation or garden hose/ laundry room installation.
counter tom /RD-1066-07717 /
WH10256 /WHOLE HOUSE WATER FILTRATION SYSTEMS/
Backwashing water filters are large tank-style filters that get their name from the fact that they clean and renew themselves by backwashing. Backwashing consists of reversing the flow of water so that it enters from the bottom of the filter bed, lifts and rinses the bed, then exits through the top of the filter tank.
The filter bed itself is a granular substance that is usually referred to as the filter medium. Media (media is plural, medium is singular) are numerous and varied. Common media are granular carbon, sand, garnet, anthracite, zeolite, granular manganese dioxide, and greensand. Many media are known by their brand names of the leading product in the category: Centaur, Filox, Birm, Filter Ag, and KDF, for example.
The picture at right shows the filter in “service” position. This is how it works when it is doing the job it is designed to do. The unfiltered water enters from the left and is routed by the control valve into the filter tank. The water then filters slowly through the medium until it reaches the bottom of the tank where it is collected through a specially-designed sieved “basket” at the bottom of the center tube seen in the picture. The filtered water then passes up through the center tube, called a “riser” or a “dip tube,” passes through the control valve, and exits the right side of the filter.
Note that there's a drain line in the picture, but no water goes through it during the filter's “service” function.
SHF1213 /SHOWER FILTERS /heavy duty/
WI776/WI777 /SMART WATER SYSTEMS/
The tap water in the municipal city is the water source of our machine. Firstly filtering tap water throughfourfilters and absorbing and other processions and then decomposing by Electrolysis Chamber,due tothe influence of hydrogen bond, the ordinary tap water is composed of 13 to 15 small molecular clusters,when the water enter into the electrolysis chamber, the hydrogen bond of water molecule is opened withthe influence of electric field and produces the small molecular cluster water with 5 to 6 water molecules.At the same time, the positive ions such as Ca2+、Mg2+、K+、H+ and so on in solution move towardthe negative pole with the influence of electric field. According to the strength of electro negativity’capability, H ion has a reduction then the electro negativity becomes hydrogen. Due to the fact that the density of H ion decreases, the hydroxide root ion is thicker and then water become weak alkalinewith the PH up to 7, the water produced in this pole is alkaline water. At the time , in the positivepole some of negative ions such as Cl-、SO42-、NO3-、NO2-、OH- etc move to positive pole.Among plenty of negative ions, the hydroxide root ion loses electrodes easterly and then has an oxidativereaction and produce oxygen and water with the loss of electrodes. At the same, the density of H ionsrises because density of the hydroxide root ion decreases so the water becomes weak acid with PHdown to 7so the water produced is acid ionic water. The chemistry formulas in two poles are as follows: In negative pole: 2H2O+2e=2OH-+H2In positive pole: 2H2O-4e=4H++O2
Filter material High-quality PPF Cotton filter Electrodes material Japanese titanium platinum electrolysis chamber and ceramic membrane（Baked in Taiwan） Display content ( 7-color LCD display) Alkaline water,purified water,acidic water,cleansing, filter longevity (figure), water-flowing volume, water process, PH, ORP, electrolysis indication and electrolysis stages Electrolysis levels Four levels of alkaline water,one purified water and two levels of acid water PH value 5 Plates and 4 Pairs (PH 3-10) Note: reference value PH subtle adjustment 126 levels of PH value Filter longevity 3000L-12000L setting volume according to water qualities (about 3 to 12 months) ORP value 3 Plates and 2 Pairs-650mv (MAX) 5 Plates and 4 Pairs-850mv (MAX) Note: reference value Rated voltage AC220V 50/60HZ (Additional regulation should be made for 110V) Consuming power Max 180W for 3 Plates and 3 Pairs; Max 230W for 5 Plates and 4 Pairs; 2.5 Win standby Input water pressure 0.9～5.0Kg/cm2 Size and weight About H310mm×W220mm×D125mm about 4.0Kg Electrodes cleansing The ionizer does automatic cleansing 10 seconds after the utilization of alkaline water with multi-stages setting according to water quality from 30 to 90L extra cleansing (The cleansing light will light up)
WI777 /COUNTER TOP SMART WATER SYSTEM/
Alkaline Smart water system Machine pH Value Range: 4.5-11 ORP Value: -850mv (Max) Platinum-titanium electrolysis plate & ion membrane manufactured in Japan Active carbon fiber manufactured in Japan . 7 color LCD touch screen display — Attractive & Functional 7 levels of water pH: 4 levels of Alkaline water, 2 levels of Acid water and Pure Filtered Water. Automatic 10 second electrolysis chamber cleansing after each Alkaline water use. Records Alkaline water production volume and automatically cleans when production reaches 50 liters Chamber cleansing provides double protection: prolongs the service life of electrolysis plates and stabilizes the Oxidation-Reduction Potential (ORP) value of the electrolysis process. Multi-functional LCD -- Convenient Fingertip Control. Displays pH, ORP, water flow rate, filter life and working status. Platinum-titanium electrolysis plate & ion membrane — manufactured in Japan. Transformer changes the voltage and the supply power for the electrolysis chamber. The transformer changes alternating current (AC) to direct current (DC), changing impedance and separating a circuit. The transformer supplies 100% power to the electrolysis chamber for making the best ion water. This transformer increases the electrolysis power, so we do not need many plates. Our 5 plates work the same or even better then other brands' 7 and 9 plates. High-tech platinum-titanium electrolysis plate manufactured by KOBE Steel, Japan. Ceramic ion membrane manufactured by Hitachi , Japan, temperature-resistant and non-toxic. Activated Carbon Fiber (ACF) Filter manufactured by Japans , USA complies with the highest drinking water standards. 110V US Plug (220V Euro Plug available upon request).
WI777 / UNDER THE SINK SMART WATER SYSTEM/
3)Wear-resistant ceramic switch controls water flow rate and prevent water leak
5)User-friendly control panel
6)Direct operation from the faucet
7)Adjustable pH value
10)LED filter replacement indicator
11)Japanese platinum baked titanium electrode and ceramic Nano-ionic membrane
12)Activated carbon filter from US with NSF approval
13)pH: 4-11 (Reference value, differ from different water quality)
15)Certification: CE, NSFFilter materialFiber activated carbon filter from America with NSF certificateElectrodes material Japanese high-tech baked titanium platinum electrolysis chamber and ceramic membraneDisplay content ( LED display)alkaline water, acid water, purified water, cleansing and filter longevityElectrolysis levels3 level of alkaline water, one level purified water and acid waterPH value3 Plates (PH 4.5-9.5) 5 Plates (PH 4-11) Note: reference valuePH Subtle adjustment126 levels fine tuning of PH valueFilter longevity6000L. 3000-12000L changeable setting for different water sourcesORP value3 Plates -450mv (MAX) 5 Plates -650mv (MAX) Note: reference valueRated voltageAC220V 50/60HZ (110V Specially ordered)Consuming powerMax 180W for 3 Plates; Max 230W for 5 Plates ; 1.7 W in standbyInput water pressure0.9-5.0Kg/ cm 2Size and weight About H310mm×W220mm×D125mm about 4.0KgElectrodes cleansing Automatic reverse cleaning. Changeable cleansing setting from 30 to 90 L according to different water qualities .5” and weighs 8.82 lbs. The countertop faucet contains an outer diameter of 2” and an inner diameter of 3/8”.
converts any sink into a healthy and delicious alkaline drinking water dispenser by removing bacteria, chemicals, and other harmful impurities from the water and infusing it with energy, ions, antioxidants, and other beneficial elements. Its compact design fits easily under the sink and its stylish and sophisticated dual-spout countertop faucet with a soft-touch button panel compliments any decor.
This smart device is easy to install and even easier to operate and maintain. It's as simple as pressing a button. It features an automatic cleansing alarm and a convenient post-use, 10-second, automatic cleansing function. The ionizer uses large platinum-titanium electrolysis plates and has 6 water pH level options: 4 alkaline levels, 1 acidic level, and 1 pure filtered water level. The display light shines blue for alkaline water and red for acidic water. The pH value is based on the quality of the source water, but should be approximately 4.5 – 11 and the ORP (Oxidation Reduction Potential), also based on the source water quality, has a maximum of -850mv. The filter was assembled in the US, contains activated carbon, is easy to change, and should be replaced approximately every 12,000 liters. This device’s certifications include: CE, SGS, ISO, and the manufacturing process complies with the highest drinking water standards.